Required Tool List

                                        

 Anyone dispatched as a journeyman or apprentice wireman                                                  under the INSIDE CONSTRUCTION AGREEMENT shall provide himself with the following tools:

---

1. 1 pr. each channel lock pliers - #420 and #430 or equivalent
2. 1 pr. side cutting pliers - 8" minimum
3. 1 pr. diagonal cutting pliers - 6"4. 1 straight claw hammer
4. 1 screwdriver - 5" blade
5. 1 screwdriver - 8" blade
6. 1 adjustable hacksaw frame
7. 1 steel rule - 12' x 3/4" minimum
8. 1 wire skinning pocket knife
9. 1 pr. long nose pliers
10. 1 tool pouch with tool belt
11. 1 scratch awl
12.  1 adjustable end wrench - 12"
13.  1 pr. tin snips - Klein #630 or equivalent
14.  1 stubby screwdriver - flat blade and Phillips
15.  1 Phillips screwdriver - Size "0"
16.  1 Phillips screwdriver - Size "1"
17.  1 Allen wrench set - 1/8" - 3/8"
18.  1 drywall saw20. 1 plumb bob - 8 oz.
19.  1 small level
20.  1 tap wrench to 1/4"23. 1 wire stripper
21.  1 wood folding rule - 6'
22.  1 non-contact type voltage tester

 

^{The Employer shall furnish all other necessary tools or equipment. The employer shall provide all Personal Protective Equipment (PPE) as defined by OSHA and/or Cal-OHSA at no charge to the employee(s). PPE provided shall be of the appropriate size. Workmen will be held responsible for the tools or equipment issued to them providing the Employer furnishes the necessary lockers, tool boxes, or other safe places for storage. Each Employer shall provide a locked box or safe place for the storage of employees' tools. Only new sanitary liners and clean hard hats will be furnished by the Employer.}